CPCCSF2004 : Place & Fix Reinforcement Materials

by Deep Buha | Mar 6, 2025

Current Status

Price

Free

Get Started

Log In to Enroll

CPCCSF2004 - Place & Fix Reinforcement Materials

Course Content

Lesson Content

0% Complete 0/6 Steps

1.1 Read and interpret work instructions and plan sequence of work

1.2 Plan all work to comply with laws and regulations, the NCC, Australian Standards, WHS and environmental requirements, manufacturers’ specifications, workplace requirements, drawings, and specifications

1.3 Select tools and equipment, check for serviceability and report any faults

1.4 Select and use PPE for each part of the task

1.5 Inspect work site, locate services, assess hazards, and apply risk controls, including required signage and barricades

1.6 Select materials required for task, calculate quantities, handle safely, and prepare and position ready for use

Lesson Content

0% Complete 0/5 Steps

2.1 Concrete Rebar

2.2 Deformed Bars

2.3 Tempcore Rebar

2.4 Reinforcing Mesh

2.5 Trench Mesh

Lesson Content

0% Complete 0/1 Steps

Lesson Content

0% Complete 0/6 Steps

6.1 Guillotine Shear

6.2 Diamond-Tipped or Similar Saw

6.3 Friction Saw

6.4 Oxy-Acetylene Torch

6.5 Manufacturing Tolerances

6.6 Economics of Cutting Steel to Length

Lesson Content

0% Complete 0/11 Steps

7.2 Standardised Bar-Bending Shapes

7.3 AS3600-2009 Addresses Bending of Reinforcement

7.4 Cutting & Bending Bars from a Coil

7.5 Bending Bars Cut from Stock Lengths

7.6 Cutting & Bending Mesh

7.7 Heating & Bending

7.8 Using Bars after Heating

7.9 On-Site Rebending

7.10 On-Site Bending of Reinforcing Mesh

7.11 Final Advice on Mistreatment of Steel

Lesson Content

0% Complete 0/3 Steps

10.1 Rust & Reinforcement

10.2 Mill Scale

10.3 Types of Coating

Lesson Content

0% Complete 0/4 Steps

11.1 Mesh Detailing

11.3 Fix Reinforcement In The Beams

11..4 Fix Reinforcement In The Slabs

Lesson Content

0% Complete 0/15 Steps

12.1 Circular Spacers

12.2 Clip Fast Bar Chair

12.3 Clip Fast Mesh Chair

12.4 Combination Plastic Bottom Deck Chairs

12.5 Combination Plastic Top Deck Chairs

12.6 Continuous Deck Chair

12.7 Foundation Frames

12.8 Heavy Duty Bar Chairs

12.9 Intersection Bar Chairs

12.10 Rocket Mesh Chairs

12.11 Slab on Ground Combination Chairs

12.12 Snake Spacer

12.13 Tall Slab on Ground Chairs

12.14 Tilt Chairs & Panel Chairs

12.15 Trench Mesh

Lesson Content

0% Complete 0/2 Steps

14.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling

14.2 Check, maintain and store tools and equipment and report any faults